Carbide
Advanz™ CS
Starrett carbide-tipped band saw blade for hardened materials.
Advanz™ CS has a carbide tip with triple chip geometry and a negative rake angle, ideal for hardened materials.
Offers high abrasion resistance, shorter cutting time and precise finish in carburized materials up to 60 HRC.
Brand
Line
Advanz™ CS
Product type
Starrett triple-chip carbide-tip band saw blade with negative angle.
Functions and benefits
| Feature | Detail |
|---|---|
| Negative rake | Ideal for hardened and case-hardened materials. |
| High abrasion resistance | Greater durability in hard materials. |
| Precise finish | Clean cuts with less cutting time. |
Tooth type
Tooth profileCarbide tip · triple chip (TC)
Available forms
Welded to lengthNote: Supplied welded to the exact size.
Typical applications
- Carburized steel
- Steel for shafts and linear guides
- Case-hardened materials up to 60 HRC
Sizes and tooth pitch (TPI)
| Width × thickness | Tooth pitch (TPI) | ||
|---|---|---|---|
| Inches | Millimeters | 2-3 | 3-4 |
| 1" × 0.035" | 27 × 0.90 | — | 92564TC-N-T |
| 1-1/4" × 0.042" | 34 × 1.10 | — | 92565TC-N-T |
| 1-1/4" × 0.050" | 34 × 1.30 | — | 92566TC-N-T |
| 1-1/2" × 0.050" | 41 × 1.30 | 92576TC-N-T | 92570TC-N-T |
| 2" × 0.063" | 54 × 1.60 | 92592TC-N-T | — |
How to read the table
The number in each cell is the Starrett part number (code) for ordering the product. Below it is the tooth profile, made up of three attributes: Form (tooth shape), Rake (face angle) and Set (how the teeth are offset):TC-N-TForm triple-chip carbide · Rake negative · Set trapezoidal
Note: Values are for reference and may vary depending on the application, the machine and the cutting conditions. For complete specifications, request the product data sheet from your NAT MAC advisor.
Related products
Advanz™ TSStarrett carbide-tipped band saw blade, general-purpose triple chip.
Advanz™ MC7Starrett carbide-tipped band saw blade (7 chips) for difficult steels.
Advanz™ MC5Starrett carbide-tipped band saw blade (5 chips) for alloys and aerospace materials.
Advanz™ FSStarrett carbide-tipped band saw blade for abrasive materials.
NATCUT™ M42-PM42 bi-metal blade with pointed (P) tooth for general-purpose cutting.