Vision Systems
AVR 200 FOV · Full field of view
Automatic + field of view (FOV)
Vision systems measure parts automatically and without contact: a color digital camera captures the image and MetLogix™ software takes hundreds of measurements in seconds, with video edge detection (VED) and comparison against the CAD file.
The AVR 200 FOV adds full field-of-view measurement to the CNC drive of the AVR 200, delivering maximum speed and automatic comparison against CAD.
Main features
CNC + full field of view (FOV)
Maximum inspection speed
Automatic comparison against CAD
Brand
Range (Z)
200 mm (8")
Max. field of view
0.93" (24 mm)
Mode
CNC + field of view (FOV)
Telecentric lenses
0.30x a 4.0x
Accuracy
0.1 µm (Renishaw)
Software
MetLogix M3 with DXF/FOV
Typical applications
- Automated dimensional inspection
- Non-contact multi-point measurement
- Production quality control
- Measurement of complex geometries
- Inspection of small parts
- Reports and traceability
- Automatic comparison against CAD
- Metrology laboratory
- Reverse engineering
Note: The data shown is for reference only and may vary depending on the model, the manufacturer and the conditions of use.
