Bronze

SAE 62 Bronze

Tin bronze for wear and friction

Tin bronze (C90500) with excellent wear resistance and load capacity. Ideal for bushings, bearings, worm wheels and gears subject to friction and heavy loads.

Standards and equivalents

SAE	UNS	ASTM	EN	DIN	JIS
62	C90500	B584 / B505 / B271	CC480K	2.1050	CAC403

Chemical composition

%	Sn	Zn	Pb	Ni	Fe	Cu
Min	9.0	1.0	----	----	----	86.0
Max	11.0	3.0	0.30	1.00	0.20	89.0

Supply condition

Continuous casting

Centrifugal casting

Sand casting

Available package sizes

Round bars1/2" – 4"12.7 mm – 101.6 mm

Hollow bars1 1/2" × 3/4" – 4" × 2"38.1 mm × 19.05 mm – 101.6 mm × 50.8 mm

—

—

Typical applications

• Bushings and sleeves
• Plain bearings
• Worm gears and gears
• ACME lead screw nuts
• Wear plates and guides
• Thrust washers
• Bushings for industrial machinery
• Pump and valve parts
• Hydraulic components
• Sleeves for pins and shafts

Note: The information and values in this data sheet are provided for reference only and may vary depending on manufacturing, treatment and application conditions. They do not constitute guaranteed specifications, so use and interpretation of this data is the user's responsibility.

Total or partial reproduction of this document is prohibited without prior authorization.