Bronze

SAE 660 Bronze

General-purpose bearing bronze

Lead-tin bronze (C93200) for general-purpose bearings and bushings; good machinability and anti-friction performance at moderate loads and speeds.

Standards and equivalents

SAE	UNS	ASTM	EN	DIN	JIS
660	C93200	B584 / B505 / B271	CC493K	2.1090	—

Chemical composition

%	Sn	Pb	Zn	Ni	Fe	Cu
Min	6.3	6.0	1.0	----	----	81.0
Max	7.5	8.0	4.0	1.00	0.20	85.0

Supply condition

Continuous casting

Centrifugal casting

Sand casting

Available package sizes

Round bars1/2" – 4"12.7 mm – 101.6 mm

Hollow bars1 1/2" × 3/4" – 4" × 2"38.1 mm × 19.05 mm – 101.6 mm × 50.8 mm

—

—

Typical applications

• Bushings and sleeves
• Plain bearings
• Pump and motor bushings
• Support plates and flat bearings
• Thrust washers
• Sleeves for pins and shafts
• Bushings for industrial machinery
• Light-duty gears and pinions
• Guides and wear components
• Bearings for machine tools

Note: The information and values in this data sheet are provided for reference only and may vary depending on manufacturing, treatment and application conditions. They do not constitute guaranteed specifications, so use and interpretation of this data is the user's responsibility.

Total or partial reproduction of this document is prohibited without prior authorization.