1045 Chrome-plated Bar
Solid round bar of medium-carbon steel SAE/AISI 1045, conditioned, ground, polished, and coated by hard chrome electroplating. Low-roughness surface, high wear resistance, reduced friction, and improved corrosion protection. Supplied in the normal or induction-hardened condition; for hydraulic and pneumatic cylinder rods, guides, columns, and linear motion components. ASTM B650 type coating.
| SAE / AISI | EN | DIN | JIS |
|---|---|---|---|
| 1045 | C45 | Ck45 | S45C |
| % | C | Si | Mn | P | S |
|---|---|---|---|---|---|
| Min | 0.43 | 0.10 | 0.60 | — | — |
| Max | 0.50 | 0.35 | 0.90 | 0.040 | 0.050 |
Hard chrome
Ground and polished
Standard bar1/2" – 4"12.7 mm – 101.6 mmHardened bar1" – 6"25.4 mm – 152.4 mm- Hydraulic cylinder rods
- Pneumatic cylinder rods
- Industrial cylinder repair
- Hydraulic platforms and lifts
- Cylinders for agricultural machinery
- Construction and mining equipment
- Presses and hydraulic systems
- Linear guides and columns
- Shafts subject to sliding wear
Note: The information and values in this data sheet are provided for reference only and may vary depending on manufacturing, treatment and application conditions. They do not constitute guaranteed specifications, so use and interpretation of this data is the user's responsibility.
Total or partial reproduction of this document is prohibited without prior authorization.
