Aluminum

3003 Aluminum

Formability and corrosion resistance

3003-H14 aluminum is a general-purpose aluminum-manganese alloy with excellent corrosion resistance, good formability and weldability. Since it is not heat-treatable, it is used mainly in sheet products that require ease of fabrication and moderate mechanical strength.

Standards and equivalents

Commercial	ASTM	UNS	EN	DIN
3003-H14	B209	A93003	AW-3003	3.0517

Chemical composition

%	Si	Fe	Cu	Mn	Zn	Others, each	Others, total	Al
Min	—	—	0.05	1.00	—	—	—	Bal.
Max	0.60	0.70	0.20	1.50	0.10	0.05	0.15	Bal.

Supply condition

Cold rolled

Available package sizes

Sheet26 ga - 16 ga0.45 mm – 1.65 mm

—

—

—

Typical applications

• Sheet and covers
• Ventilation ducts
• Vessels and tanks
• Utensils and housewares
• Signs and signage
• Panels and facades
• Heat exchangers
• Formed and deep-drawn components
• Packaging and containers

Note: The information and values in this data sheet are provided for reference only and may vary depending on manufacturing, treatment and application conditions. They do not constitute guaranteed specifications, so use and interpretation of this data is the user's responsibility.

Total or partial reproduction of this document is prohibited without prior authorization.