G11
G11 is a thermoset laminate of woven fiberglass impregnated with epoxy resin, pressed under high pressure and temperature, with excellent mechanical and dielectric properties. It offers excellent thermal and chemical resistance and allows machining and continuous service up to thermal class H (180 °C), higher than G10/FR4. It is ideal for electrical and thermal insulation in machines and equipment that require very high temperature combined with high mechanical stress.
| Commercial | Designation | Family | Density |
|---|---|---|---|
| G11 | Glass-epoxy | Thermoset laminate | 1.9 – 2.0 g/cm³ |
| Component | Identification |
|---|---|
| Reinforcement | Woven fiberglass |
| Matrix (resin) | Epoxy resin |
| Type | Thermoset laminate (high pressure) |
| Reference density | 1.9 – 2.0 g/cm³ |
| Thermal stability | 200 °C (Martens) |
| Dielectric strength | > 13 kV/mm |
| Color | Yellow |
Hot pressedLaminated pressed sheets for cutting and machining
Plates5/64" – 2"2 mm – 50 mm- Electrical insulation
- Thermal insulation
- Electrical machine components
- Electronic equipment
- Class H insulators (180 °C)
- Insulating spacers and barriers
- Dielectric supports and bases
- Insulating structural parts
- Very high-temperature components
- Highly stressed mechanical components
- Terminals and connectors
- Precision machined parts
Note: Glass-fabric laminate with high-temperature epoxy resin, suitable for class H (180 °C); yellow. Values are for reference and may vary by grade. Thermoset laminates are identified by their reinforcement (paper, fabric or glass fiber) and their resin (phenolic or epoxy), not by chemical percentages as with steels. The information and values in this data sheet are provided for reference only and may vary depending on manufacturing and application conditions. They do not constitute guaranteed specifications, so use and interpretation of this data is the user's responsibility.
